收藏我们   ENGLISH  
论文查询
范围:  
提 交
《化学分析计量》 2016年第06期
DOI:10.3969/j.issn.1008-6145.2016.06.001
铜-铬-锆合金光谱分析用标准物质的研制
王立新1,张学彬2
1.宁波金田铜业(集团)股份有限公司,浙江宁波 315034; 2.宁波市产品质量监督检验研究院,浙江宁波 315048 
Development of Cu-Cr-Zr-Alloy Certified Reference Material for Spectral Analysis
王立新1,张学彬2
1. Ningbo Jintian Copper(group) Co., Ltd., Ningbo 315034, China; 2. Ningbo Academy of Product Quality Supervision & Inspection, Ningbo 315048, China 
摘要:以电解铜和铜-铬、铜-锆中间合金为原材料,通过真空熔炼和热锻加工工艺,研制了铜-铬-锆合金光谱分析用标准物质。将样品分成4组,每组85块后,采用金相检验和光电直读光谱仪进行均匀性、稳定性和定值分析。从样品中随机抽取15块进行均匀性检验,经F检验表明,在95%的置信区间范围内样品均匀性良好;稳定性考察12个月,结果表明在考察期间内样品稳定性良好;标准物质样品经国内3家具有分析资质的实验室进行协作定值,并评定了定值结果的不确定。铜-铬-锆合金标准物质样品中Cr,Zr元素的相对扩展不确定度分别为0.015%~0.036%,0.019%~0.033%(k=2)。该标准物质达到了国家标准物质的技术要求,可用于有关铜-铬-锆合金产品中铬、锆元素的方法校准和质量控制 
Abstract:The Cu-Cr-Zr-alloy certified reference material(CRM) for spectral analysis was developed. Using electrolytic copper, Cu-Cr, Cu-Zr master alloys as raw material, the CRM was melted in the vacuum arc furnace, then forged using hot forging process. The Cu-Cr-Zr-alloy was divided into 4 sets and 85 pieces per set. The homogeneity and stability testing and quantitative analysis were evaluated by metallographic test and photoelectric direct reading spectrometer. According to analysis procedure of homogeneity, 15 pieces of sample were randomly taken from every 85 pieces, and the results were validated by F-test statistical method. The stability inspection was carried on the short-term(12 months), and the results indicated that the stability was good. A cooperative certification was conducted by 3 qualified laboratories. The relative expanded uncertainty for Cr and Zr elements of Cu-Cr-Zr-alloy reference material was 0.015%-0.036%, 0.019%-0.033%(k=2), respectively. The reference material can conform to the technical requirement of the certified reference material. The reference material was intended for use in the method validation and quality control regarding Cr and Zr elements in the Cu-Cr-Zr-alloy. 
关键词:铜-铬-锆合金;光谱分析;标准物质;铬;锆 
Keywords:Cu-Cr-Zr-alloy; spectral analysis; certified reference material; Cr; Zr 
本文引用格式:
王立新,张学彬.铜-铬-锆合金光谱分析用标准物质的研制[J].化学分析计量,2016,25(6):4-8.
Wang Lixin,Zhang Xuebin.Development of Cu-Cr-Zr-Alloy Certified Reference Material for Spectral Analysis[J]. Chemical analysis and meterage,2016,25(6):4-8. 

全文:
相似文章:
  紫外可见波长溶液标准物质的研制
2024年第02期
  氮中六氟化硫气体标准物质制备
2024年第01期
  氮化硼化学成分标准物质研制
2024年第01期
  采集时间对油料光谱分析仪测量重复性的影响
2023年第10期
  四氯乙烯中石油类溶液标准物质制备
2023年第10期
  流动注射分光光度法测定水中六价铬
2023年第08期
  微波消解-电感耦合等离子体质谱法测定土壤中10种重金属元素
2023年第08期
  甲烷中微量噻吩气体标准物质研制
2023年第08期
  硅青铜和铝青铜光谱分析标准物质的研制
2023年第08期
  超痕量六价铬分析仪的校准
2023年第06期
《化学分析计量》杂志社 版权所有,未经授权禁止复制或者建立镜像
地址:山东省济南市天桥区田庄东路3号 邮编:250031
电话:0531-85878132 85878224 85878278
鲁ICP备05018524号-6